This M Research PM-T3H Leading Edge Tape - 3" wide x 100' Roll - No Splices ill fit the following aircraft: /b>. PM Research masks are made from a clear, self-adhesive Polyurethane that is .012 of an inch thick. The Polyurethane is not affected by UV light, meaning it will never yellow and it will not change the cosmetic appearance of your aircraft. The mask is easy to install by peeling off the backing and wetting the material with a solution of distilled water, alcohol and dish washing liquid, and you can fly within an hour of installation. An 11 page instruction booklet comes with each mask giving detailed installation instructions. Shelf life is 5+ years.

Because installing a PM Research mask is like applying a thick coat of paint, FAA or PMA approval is not required, nor is an STC or Form 8130 required. This is confirmed in a letter from the FAA.

ot what you were looking for? heck out our ircraft Erosion Protection Buyer's Guide to get the exact mask you need for your aircraft!

Features

Mask material is engineered to an optimal thickness of .012 of an inch

The material is nearly invisible

The only mask material on the market that has never yellowed and will never yellow

Easy to install

The best erosion protection available