Sandstrom＃329是一种单组分，水性无机热固化这可以被应用于各种各样的金属涂层。符合：MIL-PRF-81329D。
典型用途
1配方用于极端环境中的温度，辐射和真空排除使用常规润滑油和有机固体薄膜润滑剂。
2使用液氧系统，航天器，轴承组件等设备。
特点
1提供润滑
2提供抗摩擦，磨损，擦伤和把握
3具有优异的耐热稳定性
4*符合VOC
应用说明
1。强制性的，所有表面进行脱脂，实现粘连。避免触摸清理过的表面。
2。钢表面 - 喷砂处理至50表面轮廓 - 60有效值。删除喷砂。呼叫桑德斯卓姆技术代表
在准备其他金属信息。
3。应用＃329由传统喷涂，浸涂或刷涂。薄如需要用离子交换水。
4。对于军用规格工作按照MIL-PRF-81329的所有指令
5。在70°F闪蒸出部分30分钟，50％相对湿度，前放置在烤箱。
6。固化：在180°F2小时，然后在300°F2小时。注意：开始计时，当
部分已达到所需的温度。
7。清理水，立刻。
8。在该事件是要除去＃329，物理去除是的，即：喷砂，打磨或研磨。

Sandstrom #329 is a one-component, water-based inorganic thermal curing which can be applied to various metal coatings. Conforms to: MIL-PRF-81329D.

Typical use

1 The formula is used in extreme environments with temperature, radiation and vacuum to exclude conventional lubricants and organic solid film lubricants.

2 Use liquid oxygen systems, spacecraft, bearing components and other equipment.

Features

1 Provide lubrication

2Provide resistance to friction, abrasion, abrasion and hold

3 has excellent heat stability

4*Compliant with VOC

Application note

1. Mandatory, all surfaces are degreased to achieve adhesion. Avoid touching the cleaned surface.

2. Steel surface-sandblasted to a surface profile of 50-60 effective value. Remove sandblasting. Call a Sandström technical representative

In preparation for other metal information.

3. Application #329 is applied by traditional spraying, dipping or brushing. Use ion exchange water as thin as needed.

4. For military specification work, follow all instructions of MIL-PRF-81329

5. Flash out the portion at 70°F for 30 minutes, 50% relative humidity, and place in the oven before.

6. Curing: 2 hours at 180°F, then 2 hours at 300°F. Note: start timing, when

The part has reached the required temperature.

7. Clean up the water, immediately.

8. In the event it is necessary to remove #329, physical removal is the best, namely: sandblasting, sanding or grinding.

与此原文有关的更多信息要查看其他翻译信息，您必须输入相应原文