![](http://img4.11467.com/2020/09-23/3398126839.jpg)
PPG Aerospace® P/S 872 Class B Conductive Lightning Strike Sealant
Inhibit corrosion while conducting electricity and providing a protective seal with PPG PRC-DeSoto P/S 872 Class B light gray conductive lightning strike sealant from SkyGeek. This sealant is made up of two parts and features an aluminum-filled, manganese dioxide-cured, polysulfide formula. The uncured, low-sag, thixotropic paste can be applied to desired surfaces using a spatula or an extrusion gun. once cured at room temperature, the product forms a resilient seal and adheres well to most common aircraft substrates. In order to prevent corrosion, P/S 872 is resistant to intermittent exposure to aviation gasoline and jet fuel
PPG Aerospace® P/S 872 Class B Conductive Lightning Strike Sealant Inhibit corrosion while conducting electricity and providing a protective seal with PPG PRC-DeSoto P/S 872 Class B light gray conductive lightning strike sealant from SkyGeek. This sealant is made up of two parts and features an aluminum-filled, manganese dioxide-cured, polysulfide formula. The uncured, low-sag, thixotropic paste can be applied to desired surfaces using a spatula or an extrusion gun. once cured at room temperature, the product forms a resilient seal and adheres well to most common aircraft substrates. In order to prevent corrosion, P/S 872 is resistant to intermittent exposure to aviation gasoline and jet fuel |
Features
Protects electrical and electronically sensitive devices and wiring
Prevents corrosion on aluminum alloys and between dissimilar metals
Conducts electricity
Blocks electromagnetic and radio frequency interference
Unusually long-term EMI/RMI production
Resists jet fuel and aviation gasoline
Two-part, nickel-filled, manganese dioxide-cured Permapol® P-3 polythioether compound
Uncured product made up of low-sag, thixotropic paste
Can be applied with spatula or extrusion gun
Service temperature range: -67 degrees Fahrenheit to 250 degrees Fahrenheit
Clean and prime electronics with PR-148 adhesion promoter before application to achieve resistance to 2,000 hours of salt spray.
PPG Aerospace® PR-2200 Class B Electrically Conductive Sealant
PPG Aerospace® PR-2200 Class B is an electrically conductive rapid cure, corrosion inhibitive sealant. It has a service temperature range from -67°F (-55°C) to (250°F) (121°C), with intermittent excursions up to 360°F (182°C). The cured sealant provides excellent electrical conductivity and EMI/RFI shielding effectiveness. This material acts as an barrier against the common causes of corrosion on aluminum alloys or between dissimilar metals. The cured sealant is resistant to exposure to both jet fuel and aviation ga