LEIT-C Conductive Carbon Cement

Leit-C™ CCC Conductive Carbon Cement is electrically conductive, and was formulated specifically for the mounting of samples for examination by SEM.Leit-C™CCC导电碳水泥是导电的，专门配制用于安装样品以供SEM检查。

由于其导电性，所有样品在产品干燥后即可立即插入SEM。 如果它是不导电的样品，则很可能会在样品上进行某种金属化处理，例如通过溅射镀膜或如果使用FESEM，甚至可能通过镀膜。

Leit-C CCC导电胶仅包含碳，氢和氧，因此干燥后，即使使用无窗检测器，EDS也不会检测到除这三种元素以外的峰。 如果整个样品架都用CCC“涂漆”，则水泥会掩盖支架，并且通常情况下，不会检测到来自支架本身的X射线，并且可能会干扰来自样品本身的X射线。
Leit-C™CCC dǎodiàn tàn shuǐní shì dǎodiàn de, zhuānmén pèizhì yòng yú ānzhu

Because of its electrical conductivity, all samples are ready for insertion into the SEM immediately after drying of the product. If it is a non-conductive specimen, then there is the strong likelihood that some kind of metallization would be preformed on the sample, such as by sputter coating or if a FESEM is being used, possibly even by osmium coating.

The Leit-C CCC conductive adhesive contains only carbon, hydrogen, and oxygen, therefore after drying, there would be no peaks detected by EDS other than the three elements, even with windowless detectors. If the entire specimen holder is "painted" with CCC, the cement will mask the holder and in general, one does not detect x-rays from the holder itself and would could interfere with x-rays from the specimen itself.