FlexRez 150 Flexible PUD
Flexrez 150 is intended for use as a binder for clear or pigmented coatings that require extremely high flexibility and excellent adhesion. Clean Up As soon as possible after processing and before coating has dried on e, clean up with warm water. If coating has been allowed to dry, it may be necessary to clean with a solvent such as lacquer thinner. Precautions Although water base material, spray droplets should not be inhaled. Use adequate ventilation. In confined areas, use adequate forced ventilation during application and drying. When spraying, a suitable protective vapor/particulate respirator such as #8709 manufactured by 3M Co., should be worn. In areas of minimum air movement, a fresh air mask such as #W-292 manufactured by #M Co. should also be used. Also refer to the FlexRez 150 Material Safety Data Sheet.