Sandtrom SLICK FAST 345

E345系列是一款由2部分组成的空气/强力干燥环氧树脂产品

减少配合，运动部件的摩擦。 该产品是专门设计的

通过自动混合装置分配。

混合/应用

将部分A和B以1：1的比例混合。 将产品涂在基材上，

擦掉多余的薄膜厚度为10-30密耳。

注意：适用期不到5分钟。

在空气干燥2-4小时后，涂层部件干燥处理

环境温度或在250F烘烤6秒后。Series E345 is a 2-part air/force dry epoxy product designed to

reduce friction on mating, moving parts. The product is designed

to be dispensed through an automated mixing device.

MIXING / APPLICATION

Mix parts A and B in a ratio of 1:1. Apply product to substrate,

wiping off excess to leave a film thickness of 10 – 30 mils.

NOTE: Pot life is less than 5 minutes.

Coated parts are dry to handle after air drying 2 – 4 hours in

ambient temperatures or after baking @ 250F for 6 seconds.