TR 214 Liquid Mold Release
更新时间：2024-10-20 08:03:00
价格：请来电询价
联系电话：86-021-20228098
联系手机：13391171050
联系人：张婕
让卖家联系我
详细介绍
TR 214 Liquid Mold Release 脱模剂
Liquid mold release is recommended for use on fully cured, well conditioned molds only. It is not recommended on new or reconditioned molds until at least eight or ten parts have been pulled using paste wax. It should not be used as a final coat over paste wax as the high solvent content is provided to remove wax and wax build up. Rapid settling of liquid waxes requires shaking well immediately before and during eacch use.
Directions: On clean surface apply a small amount with brush, spray, or cloth. Be sure entire area is covered. Allow to dry and brush or wipe off. Excellent on, nonskid, grained, or sand type finsihes. Repaet as required.
相关产品
